poncho
Grand Master
you need a cantina diaroma thing the one with yellow spinning stands then 8)SAVORY100 said:
My SW Den - updated 19/01/16 - PAGE 4 onwards
- Thread starter SAVORY100
- Start date
Thanks to Iain and Christian of GW acrylic fame (Shameless and well deserved plug - http://www.starwarsforum.co.uk/viewtopic.php?f=4&t=21134&hilit=acrylic ), the Den now has Acrylic tiered stands rather than my rough sawn timber ones (see first pics on this thread for the old loose display):
and a MOC wall; well to be honest not many are mint, but they are OC at least... It took about 3-4hrs of measuring, spirit level checking, adding masking tape to the rear of each of cases to create a perfect measured angle/spot to uniformly superglue 80 perspex hanging kit parts to them and then measuring again before hammering in 80 nails to pull this together... Note, I have a handful of random CBs in the mix to hold some slots as I wanted to get the layout right and installed in one go, slight issue is that I mis-measured before I ordered and can actually fit another row of 10 above... ONE DAY!
There is, in my mind, no questioning the value of these cases (and stands), they truly (no pun intended) elevate average MOCs to a much higher level!
and a MOC wall; well to be honest not many are mint, but they are OC at least... It took about 3-4hrs of measuring, spirit level checking, adding masking tape to the rear of each of cases to create a perfect measured angle/spot to uniformly superglue 80 perspex hanging kit parts to them and then measuring again before hammering in 80 nails to pull this together... Note, I have a handful of random CBs in the mix to hold some slots as I wanted to get the layout right and installed in one go, slight issue is that I mis-measured before I ordered and can actually fit another row of 10 above... ONE DAY!
There is, in my mind, no questioning the value of these cases (and stands), they truly (no pun intended) elevate average MOCs to a much higher level!
The acrylic has really taken it to the next level Steve. Looks superb. Love the Tie Fighters 8)
Graham_Marshall
Padawan
Wow!
Looking sweet! Excellent collection. Thanks for sharing.
Looking sweet! Excellent collection. Thanks for sharing.
Simply Sci-fi
Jedi Knight
- Joined
- Jan 30, 2014
- Messages
- 428
Those cabinets make for a fantastic display and it looks like there's plenty of room inside for more Star Wars goodies. Impressive to say the least.
Craig.
Craig.
Frunkstar
Grand Master
Impressive, most impressive! 8) somehow I have totally missed your thread till just now, really like the way you have it all laid out, the risers make your loose run bang & those wall mount cases are the nuts, must have been a real labour of love putting that together neatly, my fave is the Tie corner though, always had a soft spot for tie's, also nice to see you have a diagona in the mix, not full loose collection is IMO complete without the freaky green dude, you not bothering with a probot & slave ones carbonite block?
Frunkstar
Grand Master
Bugger, double post 
obiwannacollect
Jedi Knight
- Joined
- Dec 30, 2011
- Messages
- 418
Now that's a den, tri logo dengar! Want it! Awesome collection
dorsetneil
New member
- Joined
- Dec 17, 2014
- Messages
- 4
a really cool display!
Robstyley
Sith Lord
Really great collection man! Interesting displays and a lovely MOC wall. Nice loose figure collection too. I prob met you if you were at FF but there was so many people about I'm still trying to put forum names to faces :?:
:?:
