UPDATED 27/1/16: Luke Farmboy COO Reference Guide

Star Wars Forum UK - British Fan Community for Toys, Movies & Collecting

Help Support Star Wars Forum UK:

Cheers Stefan... :wink:

Thanks for that Aaron. Appreciate the comments. Still have a few on my WTB list as well... :lol:
Pbp, model trem, maybe a bootleg figure...its never ending
 
Wow Jeff, cool update with those glasslite luke variants.

Great to know there is 2 coo variants of them and that there is not only one :wink:

Maybe you soon find your 3rd glasslite :D
 
Thanks again Lars. Not sure if my funds will stretch to a third Glasslite figure just yet :lol:

I will be adding a small new 'side addition' update soon :wink:
 
2 Line, Hong Kong figure

Today I added a nice new figure to the collection. 2 Line, Hong Kong variant. It was, I thought initially, the exact same as the other dark leg figure i have had. However, I took a look at the two leg markings and noticed a slight difference between the two. There is a definite gap between the two lines on the latest addition.

Here's the two figures side by side, almost identical. Although the paint on the hands is noticbly lighter on one. Latest purchase on the left.

IMG_20140117_221937.jpg


Here's the two leg markings. Notice the gap between the two lines on the figure on the left. The light actually gives a good indication of the gap.
CYMERA_20140118_004750.jpg
 
So i had a look to see did it match any of my other Blonde hair, Hong Kong figures.
Came up with a match in the end.....notice the gap between the two line and
also the distinctive 'melted' letter "M" in the GMFGI stamp.

CYMERA_20140118_005914.jpg


Just wasn't the figure match i expected. ...it was a match for my Light Brown Hair, Hong Kong COO figure :) Hadn't seen this before....

IMG_20140117_222205.jpg
 
3 Line, Hong Kong, Black eyes figures:

Recently picked up another 3 Line Hong Kong Figure. Couple of small differences between it and the other figures i have. Here's a couple of shots of the three figures.
IMG_20140121_124233.jpg

IMG_20140121_124250.jpg


Mix of Date up and Date down leg markings.
IMG_20140121_124307.jpg
 
Comparison shot of the two loose figures. Although bith share the Date down stamp...the latest addition (In front) has a noticeably 'pinker' paint application on the face and hands

IMG_20140121_124331.jpg

IMG_20140121_124356.jpg
 
Comparison shot with UKG graded figure. While almost identical paint application to the faces the hands are very different. Also date stamping is different on the two figures.

IMG_20140121_124423.jpg

IMG_20140121_124440.jpg

IMG_20140121_124503.jpg
 
Dublinjeff said:
Thanks again Lars. Not sure if my funds will stretch to a third Glasslite figure just yet :lol:

I will be adding a small new 'side addition' update soon :wink:

As promised, Here's my little side focus. Cheaper than picking up mint complete figures :lol:
It would appear that not all letters were used on the molds for single and double letter sabers. Will try again get a list up.

IMG_20140125_112624.jpg


IMG_20140125_112708.jpg
 

Attachments

  • IMG_20140125_112644.jpg
    IMG_20140125_112644.jpg
    26.6 KB
China Raised Bar Figures:

Three of these figures at present.

IMG_20140220_224630.jpg


As discussed before, similar to the 3 Line Hong Kong Figures. Date stamping is either High or low on the leg.

Picked up a new CR/B figure today. Lower date stamping on leg. However, a different leg colour to the previous Lower date stamp figure I had.... :D Much Lighter colour finish.

Dark leg and Light leg L-R
IMG_20140220_224657.jpg

IMG_20140220_224721.jpg
 
POCH...??

Time for a quick update. Picked this figure up last week. Was a bit of a bargain at under a tenner. Arrived today, It's a 3 line, Hong Kong figure which I was happy about anyway. The first thing I noticed was the distinctive 'melt mark' on the rear of the figure. It looks very much like a factory error. Not one single other luke farmboy figure in my collection, 26 at present, has this.

The second thing is the very sloppy paint work on the legs and hands. Discussed further on. The colour of the legs is also quite different from the other five 3 line, Hong Kong variants i currently have. I will try and get a comparison picture up asap

IMG_20140304_130605.jpg

CYMERA_20140304_131010.jpg
 

Attachments

  • IMG_20140304_105255.jpg
    IMG_20140304_105255.jpg
    25.7 KB
These few pictures show the very Sloppy paint on the legs and hands. Looks almost hand painted. There is leg paint on the torso and also what looks like pink hand paint on the body of the figure.

IMG_20140304_105435.jpg

IMG_20140304_105412.jpg

IMG_20140304_105520.jpg
 
As shown above here is the paint splashes highlighted on the body of the figure. Also shown here is the plastic mould extrusions on the hand. This also features on the shoulder.
CYMERA_20140304_130757.jpg


The final unusual aspect of the figure is a small rough patch on one side of the figures face. Haven't seen it before? Similar to the rough patch found on the heads of the Dark brown hair figure...
CYMERA_20140304_131110.jpg
 
I'm no expert on this matter mate, but it certainly has all the characteristics of a Poch, the only thing to me that doesn't look quite right would be the hand colour? If it is, that is an awesome pick up, to my knowledge they rarely come in such good condition and if confirmed it be a valuable figure.

I'll keep my fingers crossed for you.

I've not had mine confirmed yet, but hoping to to get a thread going over on the imperial gunnery forum this weekend.

You checked Wolff's guide out? http://swspaceclub.com/wbobafett/poch-variants/luke-farmboy/

Also these two links Walkie posted are an excellent read -

http://www.imperialgunneryforum.com/t4427p465-the-poch-pbp-guide-discussion-thread#95812

http://www.imperialgunneryforum.com/t4427p525-the-poch-pbp-guide-discussion-thread#98231

All the best.

Aaron
 
Hi Aaron

Thanks for the input. Yeah I checked out the links above. I'm still not sure?

It has so many of the characteristics of the poch figure

1. "Melt mark" on the mould like Poch II in the guide.
2. Sloppy paint application.
3. Some plastic mould extrusion.
4. Hong Kong variant.

Interesting to see if anyone can confirm.
 
Took a few shots of my 3 Line, Hong Kong figure variants.
Here's the 6 figures. Most recent addition is at the front. Noticeable difference in the leg colour compared to the other figures
CYMERA_20140305_182904.jpg


Here are my 3 Black face paint figures. Latest addition is marked No.2 here. Leg colour is a lot darker as can be seen here.
CYMERA_20140305_182627.jpg


Finally a comparison shot of the latest figure, on the right, alongside a similar 3 Line, Hong Kong figure, high date stamping. There are a number of different aspects about the figure. First up is the distinctive melt mark on the back of the figure. Next is the "sloppy" paint work on the legs.
Also highlighted is the plastic mould extrusion on the figures hand.
CYMERA_20140305_182324.jpg
 
Fantastic guide Jeff. Surprised it's the first time I've noticed it. I've had a Luke (MOC/loose) focus for a year now but I'm still learning loads every day.Thanks for your hard work.
 
China Raised Bar figures: Update

Received this figure today from Lars. Was delighted to add another loose figure to the collection.
IMG_20140312_155415.jpg


On close inspection I noticed something I hadn't seen before on a China Raised Bar figure. It appears to have a very definite Brown face paint application. All of my other China Raised Bar figures have Black face paint application. Also any others I've seen had Black face paint. I will have to do a bit of research on this to see how common this is.

I have taken comparison pictures with my 2 other China R/B figures to highlight the distinctive difference.

Close up the difference is quite noticeable
IMG_20140312_155547.jpg


3 figures. Latest figures in the middle.
IMG_20140312_155529.jpg
 
Awesome updates Jeff, but what is the difference between the 3 china coo ? the top and bottom figures there the coo look the same ?
 

Latest posts

Back
Top