AT-AT REPAIR...............ALL FIXED!!

Star Wars Forum UK - British Fan Community for Toys, Movies & Collecting

Help Support Star Wars Forum UK:

BlueDog

Sith Lord
Joined
Apr 11, 2011
Messages
2,391
Reaction score
0
Heya Fellas, just puchased an AT-AT , legs a little yellow so I'm searching for the lower sections to replace, missing stickers but it's got it's original chin guns. Fark me it's bigger than I expected, gonna need a new display cabinet now :lol:

Need some advise re: electrics not working, tried fresh batteries, no good. Does anyone know of a repair guide someone might have put together or is it a case of nut it out over a couple a beers and hope I don't break it in the process?

Cheers Ryan
 
Sat down to clean the old thing, 1 screw driver and half an hour later and an AT-AT in bits. Cleaned all the contacts replaced bulb and now she works like new. Didn't even get a chance to crack a beer before I finished. Might have to start on the Falcon next I got the bug for pulling things apart. :D
 
ive meaning to strip my at-at for years is it easily done, im afraid of breaking something
 
Hey Poncho, It's not difficult mate it's more a matter of remembering how to put it back together. There are a couple of difficult bits I encountered for which I've drawn some ****** diagrams that may help you. Just remember to clean all contact points in the wiring thoroughly and check the connections on the motor as mine were a little loose which was causing the power to cut out when it moved. A little silicone spray around the moving parts for the lasers also helps it run smoothly. If you have any dramas send me a message and I'll try to help. Cheers Ryan
 
BlueDog said:
I've drawn some ****** diagrams that may help you.

If they are your ****** diagrams.....i'd like to see your good ones :lol:

Fantastic Ryan! Really good guide 8)
 
Ha Ha, thanks fellas,
Emiel, yeah I was thinking playing around with some sort of guide but the only problem I can see is I would need a fairly complete knowledge of the toys I would be drawing about.

I suppose I could start with the one's I have which are AT-AT, Falcon, AT-ST, X-Wing, Speeder Bike and Lukes Land Speeder ( I can't think of too much that would go wrong with the last two ). I would need to know what commonly goes wrong with these and how to fix them, common stuff like battery contacts and terminals are fairly common knowledge for most but I'm fairly new to vintage SW in comparison to many on here who would have a much better knowledge on this.

I worked out how to fix the X-wings open wing function by turning R2 around so I might have a play with that one over the next few weeks and I'll let you know when it's done.
 
Looking forward to your X-Wing experiments as I have one I must open up at one point because the electronics don't work. Be aware though that the European versions of the X-Wing don't have electronics.

If you want yourself a challenge by the way, find an Imperial Shuttle to play with. Loads of problems. Imperial Troop Transporter is a challenge too by the way, but you're already working on that aren't you. :wink:
 
Sure am, the shuttle may take a while though. They're not too common here and when they do come along they sell for big money.

No electronics in the Euro version? Well there you go I never knew that, it's exactly that sought of thing that will make it a huge challege. I may have to depend on other members knowledge and photo's of such items.

Of course I must stress I'll take any donations for the good of the guide. :D :lol: :lol: :lol: :lol: :lol:
 
ive always wanted a shuttle. infact this is the only item i want to complete my collection maybe a potf sail skiff too pricey though :)
 
:D sweet drawing mate,,,,seriously we have to work out a fix/repair guide section.. and everyone on here sends you one mystery figure for doing it??? :mrgreen:

you have some skills.
 
Capetown said:
Looking forward to your X-Wing experiments as I have one I must open up at one point because the electronics don't work. Be aware though that the European versions of the X-Wing don't have electronics.

If you want yourself a challenge by the way, find an Imperial Shuttle to play with. Loads of problems. Imperial Troop Transporter is a challenge too by the way, but you're already working on that aren't you. :wink:

Emiel,i had a similar problem with my X Wing & opened it up & spun the motor round a few times like you do with a TIE & it worked again! :D
 
DarthStanley said:
Emiel,i had a similar problem with my X Wing & opened it up & spun the motor round a few times like you do with a TIE & it worked again! :D

I'm a bit scared opening it up Mark, I'll PM you for help once I scrape the courage together. :)
 
He he thanks Imperial Nut I reckon I'd probably end up with more Klaatu's then I knew what to do with.

I'm going to have a go at some illustrations for repairing the electrics and open wing function on the X-wing in the next few days, when it's done I'll shoot Emiel a PM to see if he wants to start a repair section on the forum.

I guess another option would be if anyone else wants to do step by step videos we could link through You Tube as my vehicle collection is fairly limited. I also have to repair my Falcons electrics so I guess that will be the next venture after the X-Wing, stay tuned.

( Unless of course I **** it up then you probably won't hear from me again :lol: )
 
Just a thank you for the info, brought an at-at for my sons birthday which didn't work but after reading this, got it working!! Thanks
 
How easy it is to replace the two chin gun holders ? Just brougt a AT AT where they are trashed :cry:

A good site to help with fixing ships etc is toyfixer.com

There is even a AT AT fix here:

http://www.toyfixer.com/full-at-at-restoration-step-by-step
 
Hey guys,

This was really good read. Managed to fix electrics in At At I bought yesterday in no time at all. Forgot how amazingly simple toys were back in the day. 2 batteries, a motor and a switch - simple and easily fixed. I look in the kids toys at the moment and all you see are chip boards!

Steve
 
I had a quick look at the diagrams blue dog drew which are excellent and kept me right. The electronics were pretty simple and the only thing I needed to clean was the copper battery connection on the negative side (if its the electrics which aren't working try this first because it will stop you having to take the head and neck apart).

Must a admit did have a couple of beers to keep me right.

Take your time and it will be fine. Only problem I had was when taking head apart orange sticker at the front broke down middle.
 

Latest posts

Back
Top