The LEGO Corner

Star Wars Forum UK - British Fan Community for Toys, Movies & Collecting

Help Support Star Wars Forum UK:

theforceuk said:
This looks like a great set, looking forward to getting this in September.

https://www.amazon.co.uk/75292-Star-Wars-Mandalorian-Minifigures/dp/B082N332HB/ref=redir_mobile_desktop?ie=UTF8&aaxitk=fjG2VFdHu1ojm.uH6uLItw&hsa_cr_id=3070095090402&ref_=sbx_be_s_sparkle_mcd_asin_0

I'd love to see a UCS of this!
 
I see this is available again. Has anyone built this? I've always quite fancied it....

https://www.lego.com/en-gb/product/betrayal-at-cloud-city-75222
 
MrGudz said:
I see this is available again. Has anyone built this? I've always quite fancied it....

https://www.lego.com/en-gb/product/betrayal-at-cloud-city-75222

That is a cool set, £300 though. :shock:
 
MrGudz said:
I see this is available again. Has anyone built this? I've always quite fancied it....

https://www.lego.com/en-gb/product/betrayal-at-cloud-city-75222

That is an impressive set 👍😎
 
UCS Shuttle finally finished as LEGO spare parts arrived after 3 weeks!

20200710_174915.jpg


*for some odd reason the pic orientation is wrong!*
 
As an Amazon Associate we earn from qualifying purchases. Product prices and availability are accurate as of the date/time indicated and are subject to change.
MrGudz said:
Exclusive SDCC set. Looks nice but I bet it costs a bomb!?

image-3-640x408.png

That's a great looking set, I hope that it gets a general release and that it's not too expensive.
The building instructions are available on line if anyone wants to get the bricks independently.
 
Looks like it might be a Canada exclusive 🤬

I've bricklinked the parts as LEGO put the manual online. Will post a pic once it's done.
 
robpmarsh said:
Looks like it might be a Canada exclusive 🤬

I've bricklinked the parts as LEGO put the manual online. Will post a pic once it's done.
Rob
What did the bricks cost you?
As it it is a Canadian exclusive I may go the same route.
Cheers.
 
Picked these up.
Love the galaxies edge transporter...
 

Attachments

  • A60FEFE0-7C7E-48F2-9CBB-C35C4E47959D.jpeg
    A60FEFE0-7C7E-48F2-9CBB-C35C4E47959D.jpeg
    155.1 KB
Mini99 said:
robpmarsh said:
Looks like it might be a Canada exclusive 🤬

I've bricklinked the parts as LEGO put the manual online. Will post a pic once it's done.
Rob
What did the bricks cost you?
As it it is a Canadian exclusive I may go the same route.
Cheers.

About £45.......mostly from LEGO and Bricklink. I just followed the official LEGO instructions for the brick quantities.

Only exclusive thing is the 49th anniversary sticker....easily printed
 
robpmarsh said:
Mini99 said:
robpmarsh said:
Looks like it might be a Canada exclusive 🤬

I've bricklinked the parts as LEGO put the manual online. Will post a pic once it's done.
Rob
What did the bricks cost you?
As it it is a Canadian exclusive I may go the same route.
Cheers.

About £45.......mostly from LEGO and Bricklink. I just followed the official LEGO instructions for the brick quantities.

Only exclusive thing is the 49th anniversary sticker....easily printed
Many thanks [mention]robpmarsh[/mention] very much appreciated.
If it does turn out to be a exclusive I will go this route.
 
I hope to grab a Bespin set at some point and if that is the price I figure 75 on evilbay is going to be about right. Any more and bricklink is the way.

I've actually bricklinked or brick owled (I do prefer brick owl) four exclusives so far where the evilbay cost is stupid.

The SDCC Indian jones set from back in the day. If I recall the bricks and figures were about 40ish but getting the right stickers was a bit much though....

The Dino stand which cost about 10 for the parts and way too much for the Dino

The solo falcon which was about 30ish including figures

The detention block which was about 50ish all in.

Unless you want the instructions and a box to gather dust, doing it that way is often the best approach.
 

Attachments

  • 4692E855-B743-49C5-BE2F-0C2279BA6AA8.jpeg
    4692E855-B743-49C5-BE2F-0C2279BA6AA8.jpeg
    38.1 KB
  • 41D0FF1D-1E85-4293-A0CA-0D5FB61CAE10.jpeg
    41D0FF1D-1E85-4293-A0CA-0D5FB61CAE10.jpeg
    47.3 KB
  • D97D44D2-8465-4BA7-92D5-ABC1C579C4A1.jpeg
    D97D44D2-8465-4BA7-92D5-ABC1C579C4A1.jpeg
    31.1 KB
  • 6B4EDCC2-D1C9-482E-BA87-50AB7A6D0F7C.jpeg
    6B4EDCC2-D1C9-482E-BA87-50AB7A6D0F7C.jpeg
    43.7 KB
  • 9679A2E5-60F0-44D1-8A06-576BA95119EE.jpeg
    9679A2E5-60F0-44D1-8A06-576BA95119EE.jpeg
    38.6 KB
MrGudz said:
Being released in the U.S for $40 according to catalogues being distributed there:

21FF938E-1D53-4119-BD1B-8C560DD2F268.jpeg

Thanks, lets hope that it gets a UK release too as I think that the box artwork is great.
 
I've always fancied having a go at this!?

http://www.brickstruct.com/Brickstruct.com/AT%20ACT%20Page.html

I've had a bash at his Helms Deep as well.
 
Back
Top