Acrylic Display Solutions Quality Bespoke Display Cases

[Vaders_Child]

All orders taken after 10/12/11 will be shipped after 3/1/12

Acrylic Display Solutions

Quality acrylic cases made to suit every display requirement, standard size cases and customer specific custom case design.

All cases come with 95% UV protection as standard

All cases can be purchased under 2 catagories, catagory 1 is "Standard" which includes the 95% UV protection and are 3mm in thickness, catagory 2 is "High Grade" which includes 95% UV protection and are 4mm in thickness.Large size cases will be manufactured from the high grade 4mm material as standard

Multiple case order discounts include 5 - 9 cases 5% discount, 10 - 14 cases 7.5% discount - 15+ cases 10% discount.To recieve these discounts on multiple case orders you must purchase 5+ of the same case, mix and match orders of low quantity do not qualify

All cases come with a sliding bottom access but this may vary with future products

Postage within the UK is £4 for 1 case and for 2 - 15 cases is £8.65, any orders over 15 cases will be split into multiple parcels.

Please contact us via PM on this forum or via this email address [email protected]

VINTAGE STAR WARS CARDED

Standard size vintage Star Wars 1977-1985 carded figure
Standard = £9.99 each / High Grade = £12.99 each
"Click on picture to view in full size"

Vintage Star Wars 1977-1985 carded figure oversize bubble
Standard = £11.99 each / High Grade = £14.99 each

Vintage Star Wars Meccano 20 back carded figure
Standard = £9.99 each / High Grade = £12.99 each

Vintage Star Wars carded die-cast vehicles
Standard = £13.99 each / High Grade = £16.99 each

VINTAGE STAR WARS BOXED

Vintage boxed Mini Rig with flap cases (not tri logo, flap only mini rigs)
Standard = £16.99 each / High Grade = £19.99 each

Vintage boxed Tauntaun, open and closed belly
Standard = £16.99 each / High Grade = £19.99 each

Vintage boxed Hoth Wampa
Standard = £16.99 each / High Grade = £19.99 each

Vintage boxed Speeder Bike
Standard = £15.99 each / High Grade = £18.99 each

Vintage boxed Landspeeder
Standard = £19.99 each / High Grade = £22.99 each

Vintage boxed Tri-Logo Rebo Band
Standard = £19.99 each / High Grade = £22.99 each

Vintage boxed Rebo Band with window and flap
Standard = £16.99 each / High Grade = £19.99 each

Vintage boxed Snowspeeder
Manufactured in high grade 4mm due to size = £49.99

Vintage boxed Jabba The Hutt Action Playset
Manufactured in high grade 4mm due to size = £54.99

Vintag boxed Scout Walker (AT-ST)
Manufactured in high grade 4mm due to size = £39.99

Vintage boxed X-Wing Fighter
Manufactured in high grade 4mm due to size = £59.99

Vintage boxed B-Wing Fighter
Manufactured in high grade 4mm due to size = £79.99

Vintage boxed Y-Wing Fighter
Manufactured in high grade 4mm due to size = £79.99

Vintage boxed Imperial Shuttle
Manufactured in high grade 4mm due to size = £99.99

Vintage boxed AT-AT
Manufactured in high grade 4mm due to size = £99.99

Vintage boxed Millennium Falcon
Manufactured in high grade 4mm due to size = £99.99

BAGGIED ACTION FIGURES

Baggied action figures only not to include any extras
Standard = £5.99 / High Grade = £8.99

Baggied action figure with mailer box, centre bracket divide for 2 cell display
Standard = £12.99 / High Grade = £15.99

COINS

Vintage Star Wars coin cases
x5 = £4.99 , x10 = £8.99 , x15 = £13.45
Postage in the UK for these will be £3.50 capped via recorded delivery. International postage cost upon request.
"Click on picture to view in full size"

 

[Vaders_Child]

Thanks Ed for allowing me to post this on your forum, i appreciate it buddy :wink:

More pictures and case sizes to come

 

[Vaders_Child]

Just realised i may have posted this in the wrong section.
Please move it to the promote business section Ed if i have.

 

[spoons]

Any plans for Die Cast cases VC?

I could do with a few cases for DC TIEs

 

[Vaders_Child]

Any plans for Die Cast cases VC?

I could do with a few cases for DC TIEs

Hi spoons
Yes i will have a standard Die-Cast case eventually.
For now if you want a quote for some you can pm or email me with the item dimensions, width, hight + depth also any requirements.
Cheers buddy

 

[waztotuk]

Do you do a Rebo band one?

 

[Vaders_Child]

Hi
Yes we do a rebo band one, its not on the price list yet but we do it.
Is it for a boxed rebo band and if so is it a tri logo or standard boxed with window?
Would you like me to pm you a quote?
Cheers buddy
Darren

 

[Jukesy]

Hi Vaders_Child, looking at your cass they look really good where in the west midlands are you based if you don't mind me asking? I could be persuaded to pick some up

 

[Vaders_Child]

more prices and sizes added to the list.

Spoons i have added a price for the vintage carded die-cast vehicles.Can add boxed die cast prices if you need me to.

Waz i have added prices for the boxed Tri-Logo and boxed standard window with flap Rebo Bands.

Jukesy i live in Brierley Hill near the Merry Hill centre, if you wanted to collect i would need your order and the time to manufacture them, if your not too far away i could bring them to you.

 

[Capetown]

Can you make boxed TaunTaun (open or closed belly) and Wampa cases too Darren?

 

[Vaders_Child]

Can you make boxed TaunTaun (open or closed belly) and Wampa cases too Darren?

Hi Emiel yes i can make those, i can make cases for anything boxed or carded i just need the dimensions for most of it as i dont have examples of most things to hand.I will price them up and get the cost put in the price list asap for you buddy.
Sorry if i got your name wrong :wink:

 

[Capetown]

You've got my name perfectly right mate.

Do you need dimensions for the TaunTaun and Wampa boxes or do you have them already?

 

[spoons]

more prices and sizes added to the list.

Spoons i have added a price for the vintage carded die-cast vehicles.Can add boxed die cast prices if you need me to.

Thanks VC - I'll go for three DC TIE boxes, but I'll pm you measurements just to be sure. The Palitoy card stock is slightly bigger than Kenner stock

 

[Vaders_Child]

Emiel i should be ok with the dimensions thanks, i will try to get the prices up in the list tomorrow

Spoons i will wait for your pm for the moc dc tie's, cheers pal

 

[Caswellbot]

Hey darren, are you making these personally then mate?

Chris

 

[Vaders_Child]

Hi Chris
Yes i am making them along with somebody who helps out when i dont have time to.

 

[Vaders_Child]

more sizes and prices added

 

[Caswellbot]

Hi Chris
Yes i am making them along with somebody who helps out when i dont have time to.

Thanks Darren.

 

[Jukesy]

Hiya Darren,

I will be probably be looking at taking 5 standard cases at the moment then re-access my situation before deciding on how many more i will need along with vehicle/playset ones, and i live in Tipton

 

[Vaders_Child]

Hiya Darren,

I will be probably be looking at taking 5 standard cases at the moment then re-access my situation before deciding on how many more i will need along with vehicle/playset ones, and i live in Tipton

PM sent bud :wink: