The AT-AT All terrain armoured transport walker please help!

ash

New member
Joined
Aug 22, 2011
Messages
2
I have an at-at walker and i have put the batteries in but nothing happens? Does it have an on/off switch? I cannot find one anywhere! Its driving me nuts lol. Please can someone give me any advice? Thanks :evil:
 
Theres no on and off swith as such. There should be a button that you can press on the handle which controls the head. This can be found inside the body of the AT AT. If that doesnt work then it probably means the electrics are knackered.

Here is a link to how to get the electrics working again on an x wing. The principle will be the same for the AT AT. Hope this is of some help.

http://www.starwarsforum.co.uk/viewtopic.php?f=16&t=8915

Chris. 8)
 
Here's another that may be of help :D

http://www.starwarsforum.co.uk/viewtopic.php?f=16&t=8634
 
What we need is a guide for the Imperial Shuttle: electrics and broken wing mechanism! I am scared to have a go in case I make things worse.
 
I'm working on my 10th at-at right now. If you need spares let me know.

I usually find the connection issues are with the battery connections in the bay. They usually have crud on them, if you rub them down with something abrasive it usually does the trick.

If the light comes on but the motor doesn't move it might be jammed you can usually free it up by moving the guns back and forward :)

S
 
last17 said:
If the light comes on but the motor doesn't move it might be jammed you can usually free it up by moving the guns back and forward :)

S


I often find bits of lego in the chin gun mechanisms as well.
 
Old Thread: Hello . There have been no replies in this thread for 365 days.
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.
Back
Top Bottom