SWTOTW, Week 48, 2019 Dengar

[Pomse2001]

Good selection, Lars 8)

Thanks mate for the kind words

 

[Snaketibe]

and last my 20 figures, one of my figures is missing the foot, but I hope I get a better one in the future so I can upgrade it :lol:

I did the pictures of the figures today with flash, flash works ok on dengar, but I still prefer sunlight, but in denmark it is dark today and raining again :lol:

P1190065.JPG

P1190066.JPG

P1190069.JPG

P1190070.JPG

Another superb collection of cards and figures Lars! And the flash photos came out really well, so congratulations for that too.

As always, thank you for sharing your extremely impressive collection!

 

[Pomse2001]

and last my 20 figures, one of my figures is missing the foot, but I hope I get a better one in the future so I can upgrade it :lol:

I did the pictures of the figures today with flash, flash works ok on dengar, but I still prefer sunlight, but in denmark it is dark today and raining again :lol:

P1190065.JPG

P1190066.JPG

P1190069.JPG

P1190070.JPG

Another superb collection of cards and figures Lars! And the flash photos came out really well, so congratulations for that too.

As always, thank you for sharing your extremely impressive collection!

Thanks mate for the very impressive words

 

[TheJabbaWookie]

I just thought I'd revisit Dengar. It's a character I've been interested in for the last few months and thought I'd share my research so far. This may be something I do a little more in depth at a later stage but for now.

Family I 1a and 1b (2 line coo) - Smile Factory (HN)
Should be paired with Imperial Hoth Rifle v1 (from TIG)
- The mold was then scarred by Smile and became the European No Coo Family I 2a or 2b

Family II 1a and 1b (3 line coo) - Unitoy Factory (HT)
Should be paired with Imperial Hoth Rifle v4 with circular epm on barrel (from TIG)
- Parts sent to POCH/PBP to be assembled to make POCH Made in Hong Kong 3 line coo
- The molds were then sent to PBP where they were scarred and became the PBP scar no Coo (Dark Armour) Family II 2a, 2b and 2c (scarred no coo; made in scarred no coo and made in on scarred no coo)

Family III 1a and 1b (4 line coo) - Kader Factory (HG)
Should be paired with Imperial Hoth Rifle v2 (from TIG)
- Parts sent to POCH/PBP to be assembled to make POCH Made in Hong Kong 4 line coo

For more info on Dengar coos visit Wolff's website:
https://swspaceclub.com/wbobafett/coo-guide-3-0/esb/dengar/#a

For more info on the Imperial Hoth Rifle visit:
https://www.imperialgunnery.com/rifles

For more info on Kenner Star Wars factories visit:
https://swspaceclub.com/wbobafett/factory-codes/

*work in progress; happy to update files where advised

 

[Pomse2001]

I just thought I'd revisit Dengar. It's a character I've been interested in for the last few months and thought I'd share my research so far. This may be something I do a little more in depth at a later stage but for now.

Family I 1a and 1b (2 line coo) - Smile Factory (HN)
Should be paired with Imperial Hoth Rifle v1 (from TIG)
- The mold was then scarred by Smile and became the European No Coo Family I 2a or 2b

Family II 1a and 1b (3 line coo) - Unitoy Factory (HT)
Should be paired with Imperial Hoth Rifle v4 with circular epm on barrel (from TIG)
- Parts sent to POCH/PBP to be assembled to make POCH Made in Hong Kong 3 line coo
- The molds were then sent to PBP where they were scarred and became the PBP scar no Coo (Dark Armour) Family II 2a, 2b and 2c (scarred no coo; made in scarred no coo and made in on scarred no coo)

Family III 1a and 1b (4 line coo) - Kader Factory (HG)
Should be paired with Imperial Hoth Rifle v2 (from TIG)
- Parts sent to POCH/PBP to be assembled to make POCH Made in Hong Kong 4 line coo

For more info on Dengar coos visit Wolff's website:
https://swspaceclub.com/wbobafett/coo-guide-3-0/esb/dengar/#a

For more info on the Imperial Hoth Rifle visit:
https://www.imperialgunnery.com/rifles

For more info on Kenner Star Wars factories visit:
https://swspaceclub.com/wbobafett/factory-codes/

*work in progress; happy to update files where advised

Thanks mate for all the great info and all the great work, now I have to check the ones I have found in childhood collections about I have found them with the correct weapon variant, keep up the great work and thanks for keeping this old threads alive

 

[Snaketibe]

I just thought I'd revisit Dengar. It's a character I've been interested in for the last few months and thought I'd share my research so far. This may be something I do a little more in depth at a later stage but for now.

Family I 1a and 1b (2 line coo) - Smile Factory (HN)
Should be paired with Imperial Hoth Rifle v1 (from TIG)
- The mold was then scarred by Smile and became the European No Coo Family I 2a or 2b

Family II 1a and 1b (3 line coo) - Unitoy Factory (HT)
Should be paired with Imperial Hoth Rifle v4 with circular epm on barrel (from TIG)
- Parts sent to POCH/PBP to be assembled to make POCH Made in Hong Kong 3 line coo
- The molds were then sent to PBP where they were scarred and became the PBP scar no Coo (Dark Armour) Family II 2a, 2b and 2c (scarred no coo; made in scarred no coo and made in on scarred no coo)

Family III 1a and 1b (4 line coo) - Kader Factory (HG)
Should be paired with Imperial Hoth Rifle v2 (from TIG)
- Parts sent to POCH/PBP to be assembled to make POCH Made in Hong Kong 4 line coo

For more info on Dengar coos visit Wolff's website:
https://swspaceclub.com/wbobafett/coo-guide-3-0/esb/dengar/#a

For more info on the Imperial Hoth Rifle visit:
https://www.imperialgunnery.com/rifles

For more info on Kenner Star Wars factories visit:
https://swspaceclub.com/wbobafett/factory-codes/

*work in progress; happy to update files where advised

Interesting stuff! Thanks for sharing your research.