Cardbacks with Correct Figure and accessory

[Palifan]

Jeremy, this is great. This is more along the lines of what I would of expected. I'll pm you for more info in the next few days.

Just wondered if you think my Han one from the sealed Large Head Han cut card is a V5? You see to have an expert eye for these things so it would be good to know.

Ian

I would say it is the M4c mould off of Variant Villain. I have highlighted some of the identifying mould traits. The M4a and M4c are in my opinion the v4 mould off of TIG.

This is great to see and I agree that the loose blaster does look like V4 (M4a/M4c) but do you not think that the sealed cut card one might also be this issue of blaster?

Ian

 

[TheJabbaWookie]

Yes I believe you're right. We haven't seen a Kenner 12 back small head Han with a M4 rebel blaster but Palitoy 12 backs were released later than US 12 backs.

I don't know much about Palitoy 12 backs but guessing the large head Han is much rarer on 12 backs than small head Han just like Kenner.

Guess it's also possible it could of been carded later in the line using excess 12 back cards.

 

[Palifan]

Yes I believe you're right. We haven't seen a Kenner 12 back small head Han with a M4 rebel blaster but Palitoy 12 backs were released later than US 12 backs.

I don't know much about Palitoy 12 backs but guessing the large head Han is much rarer on 12 backs than small head Han just like Kenner.

Guess it's also possible it could of been carded later in the line using excess 12 back cards.

The Large Head Han was certainly released late in the line so it's possible that it was carded using excess card backs and might be why it possibly has this V4 blaster. It would be good to see what the sealed Palitoy 12 back pin heads came packed with if there are any others to compare with Jeremy's.

Ian

 

[Pomse2001]

Yes I believe you're right. We haven't seen a Kenner 12 back small head Han with a M4 rebel blaster but Palitoy 12 backs were released later than US 12 backs.

I don't know much about Palitoy 12 backs but guessing the large head Han is much rarer on 12 backs than small head Han just like Kenner.

Guess it's also possible it could of been carded later in the line using excess 12 back cards.

The Large Head Han was certainly released late in the line so it's possible that it was carded using excess card backs and might be why it possibly has this V4 blaster. It would be good to see what the sealed Palitoy 12 back pin heads came packed with if there are any others to compare with Jeremy's.

Ian

I agree let us hope more will be shared in the thread so we can learn more, this is very interesting reading guys, I wish I had some 12 back moc so I could help :wink:

 

[theforceuk]

Tie Fighter Pilot on Trilogo Hong Kong card, figure and card are from childhood no idea about blaster!

 

[Pomse2001]

Tie Fighter Pilot on Trilogo Hong Kong card, figure and card are from childhood no idea about blaster!

Thanks mate for sharing this tie fighter pilot

 

[theforceuk]

Lando Trilogo, figure and card back are matching helmet was purchased from eBay in the late 00's and staff I'm really not sure.

 

[theforceuk]

8D8 Trilogo. Both acquired from my childhood so 100% matching.

 

[theforceuk]

Prune Face on Trilogo card all from childhood so 100% matching.

 

[theforceuk]

Trilogo AT-ST, figure and card back a match, not sure about blaster.

 

[theforceuk]

Trilogo made in Mexico Lumat, all 100% match from childhood.

 

[TheJabbaWookie]

I wish I had this much of my childhood collection still with me. In fact any piece would do :lol:

 

[theforceuk]

Anakin Skywalker on Trilogo from my childhood collection.

 

[theforceuk]

Last one! Sorry for spamming but had a free afternoon. I've missed out any doubles I had as kid as I just can't be sure which figures came with which card backs. I'm pretty sure I was given 2 Woolworths 99p 8 packs as a kid and still have the figures which I can be 99% sure came in them.

Anyway last but not least Han Carbonite all parts 100% a match.

 

[theforceuk]

I wish I had this much of my childhood collection still with me. In fact any piece would do :lol:

I am lucky, I was/am a bit of an odd kid. lol

 

[Pomse2001]

I wish I had this much of my childhood collection still with me. In fact any piece would do :lol:

I am lucky, I was/am a bit of an odd kid. lol

No problem, thanks for sharing them all that is amazing with so many at one time

 

[Pomse2001]

Here I have a Tri-logo AT-ST Driver from a danish childhood lot

 

[TheJabbaWookie]

I'm not so hot on trilogos, at-st drivers and Taiwan card backs. So the perfect storm. I do know that it looks like the Taiwan blaster though

 

[Pomse2001]

I'm not so hot on trilogos, at-st drivers and Taiwan card backs. So the perfect storm. I do know that it looks like the Taiwan blaster though

Thanks mate I have 2 different tri-logo moc, I have totally forgot about them , I can check the blasters in them and upload pictures for research

 

[Pomse2001]

I'm not so hot on trilogos, at-st drivers and Taiwan card backs. So the perfect storm. I do know that it looks like the Taiwan blaster though

I have tried to take pictures of the blaster on this tri-logo moc but the pictures of the blaster is not good, I will try to see if I can take some better ones.

 

[Pomse2001]

Another cardback with figure from a danish childhood lot collection.

It is a Palitoy 65 back made in Hong Kong.

The hood is marked with the letter A inside the hood and the stamp on the leg looks like it is a no coo.

 

[TheJabbaWookie]

Sorry Lars. Can't help you with this one. Haven't looked at Chirpa at all and the people I've spoken to say it's a lot more complicated then they imagined.

 

[Pomse2001]

Sorry Lars. Can't help you with this one. Haven't looked at Chirpa at all and the people I've spoken to say it's a lot more complicated then they imagined.

No problem mate, since it was the only chief chirpa in the lot, then there is a very good chance everything comes from this cardback :wink:

 

[Pomse2001]

I will soon make another update, got a childhood lot with figures and cardbacks

 

[Pomse2001]

Here we go, Chewbacca Tri-logo from a danish childhood lot.

What do you guys think about the coo, figure variant and the rifle does it look correct for this tri-logo ?

 

[Pomse2001]

Here is another one

Lando Calrissian with Tri-logo

 

[Pomse2001]

Han Solo Bespin with Palitoy 65 back Special offer Chewbacca Bandolier Strap

 

[Pomse2001]

This is the only bespin blaster from the lot. Is it the correct variant for solo or lando ? or both

 

[Snaketibe]

This is the only bespin blaster from the lot. Is it the correct variant for solo or lando ? or both

I believe it is probably correct for both since the blaster and both figures are Smile variants according to the excellent Variant Villain website:

https://www.variantvillain.com/characters/esb/han-solo-bespin-outfit/
https://www.variantvillain.com/characters/esb/lando-calrissian/
https://www.variantvillain.com/accessory-guide/bespin-blaster/

 

[Pomse2001]

I believe it is probably correct for both since the blaster and both figures are Smile variants according to the excellent Variant Villain website:

https://www.variantvillain.com/characters/esb/han-solo-bespin-outfit/
https://www.variantvillain.com/characters/esb/lando-calrissian/
https://www.variantvillain.com/accessory-guide/bespin-blaster/

Thanks mate for the info so both was sold with the same blaster