Acrylic Tips / Grading

[Leemcl]

Hi All

Can anyone advise me as to what Acrylic cases are best for Baggie figures. I have a few I'd like to display, including 1 with the box and pamphlet.

Also I have some Moc's I was looking at cases for. There is a seller on eBay ( Actionforce toys ) who has some 4mm cases at £12.99. I see this seller is not completely liked here, but it would seem a UKG case is not as good as theses ? Right or wrong ?? Obviously I would buy from here and not eBay if I could but moc cases are currently out of stock.

One final question. If you have a MOC with a hairline crack on the bubble can it be graded or not ? I assmue it could be but would get a poor marking as a result.

Thanks in advance

Lee

 

[MarkG]

GW Acrylic offer cases for the mailaway and plain baggie figures.

Give Iain or Christian a shout and you'll be sorted.

 

[lejackal]

If there is a crack in the bubble, hairline or otherwise, the best you'll get is a 60 as far as I know.

Baggie and mailer wise mine are currently in GW cases but I have a UKG graded baggie to collect from the PO tomorrow so can do a side by side shot for you on that front. The GWs will definitely be cheaper at about 2 for £10 against the £23 for the UKG one and grade and obviously the GW ones are slide backs, the UKG is sealed.

MOC cases I've only ever bought GW so can't really offer any advice there.

 

[Leemcl]

Thanks Guys

With the GW cases what is the code for the one's I'll need ?

I think they have a "Mailer" case, but not sure if that's the same as a "Baggie" case.

 

[lejackal]

Thanks Guys

With the GW cases what is the code for the one's I'll need ?

I think they have a "Mailer" case, but not sure if that's the same as a "Baggie" case.

For baggies


AFC-11 (2pk) = £8.00 - R2, R5, Yoda and Ugnaught
AFC-21 (2pk) = £9.00 - The rest
AFC-31 (2pk) = £10.00 - EV9D9 and IG-88
AFC-41 (each) = £6.00 - Amanaman

Not sure on the twin chamber ones code wise but they suit Emperor/Nunb/Vader mailers

They do Fett and Popy cases as well, for anything else displayed with the leaflet you may need UKG.

 

[itfciain]

Looks like this has been answered already but if you do have any questions about acrylic then drop either Christian or myself a message and we will be happy to help

With regards to the MOC cases - most fit in the ADC-11 which is the std cases - these work out cheaper than the Actionforce Toys cases and I promise you are better quality - funny story - I nearly cased up my 200 cards (that I had at the time) in Andy's cases - we had sorted out a price and everything - then I met smooth talking, Santa lookalikey, Christian at the first Furthest from and before you know it I have 200 GW acrylic on my doorstep instead

 

[lejackal]

Side by side with a GW case

Here are both cases and the twin chamber shown together as well as the smaller R2 size (R2 is on the way to fill this one nicely