2nd Opinion on these Yoda please

[StarWarsFan]

Hi have 4 Yodas, after research and comparing am sure at least one in PBP but could do with a 2nd opinion please. Also the coat for Yoda without a belt looks different repro maybe? Cheers

 

[StarWarsFan]

Yoda continued

 

[TheJabbaWookie]

They are all family III Smile figures. There are 3 different Smile coos and one of them, the 1c, not listed on Wolff’s guide, often comes with light limbs which can be mistaken for the light poch paint.

There is actually a debate as to whether there is a PBP yoda with most people thinking PBP packed the Lili Ledy Regresso yoda on PBP cards.

There is an POCH Greyhead Yoda with a family I Kader CoO and a POCH Apple with family II Unitoy CoO. But both of these are quite distinctive.

There are some POCH hybrid combos with a combination of Unitoy and Kader bodies, heads and limbs but again the paint on the limbs is key.

Hope this helps.

 

[StarWarsFan]

They are all family III Smile figures. There are 3 different Smile coos and one of them, the 1c, not listed on Wolff’s guide, often comes with light limbs which can be mistaken for the light poch paint.

There is actually a debate as to whether there is a PBP yoda with most people thinking PBP packed the Lili Ledy Regresso yoda on PBP cards.

There is an POCH Greyhead Yoda with a family I Kader CoO and a POCH Apple with family II Unitoy CoO. But both of these are quite distinctive.

There are some POCH hybrid combos with a combination of Unitoy and Kader bodies, heads and limbs but again the paint on the limbs is key.

Hope this helps.

Thanks, but family III Smile figures?

 

[TheJabbaWookie]

Smile, Unitoy and Kader were the 3 Hong Kong factories that made Yoda Kenner Star Wars figures.

Have a look at Wolff’s guide
https://swspaceclub.com/wbobafett/coo-guide-3-0/esb/yoda/#a

Family I = Kader
Family II = Unitoy
Family III = Smile

Family I moulds were passed to Lili Ledy in Mexico to make the Regresso Yoda. Family II moulds were used to make the Euro no coo, POTF and Meccanno figures.

 

[StarWarsFan]

Smile, Unitoy and Kader were the 3 Hong Kong factories that made Yoda Kenner Star Wars figures.

Have a look at Wolff’s guide
https://swspaceclub.com/wbobafett/coo-guide-3-0/esb/yoda/#a

Family I = Kader
Family II = Unitoy
Family III = Smile

Family I moulds were passed to Lili Ledy in Mexico to make the Regresso Yoda. Family II moulds were used to make the Euro no coo, POTF and Meccanno figures.

Are right thanks are they worth anything? Cheers? Any idea on the cape?

 

[TheJabbaWookie]

£15-20 with cloak and belt

 

[StarWarsFan]

£15-20 with cloak and belt

Cheers

 

[StarWarsFan]

Smile, Unitoy and Kader were the 3 Hong Kong factories that made Yoda Kenner Star Wars figures.

Have a look at Wolff’s guide
https://swspaceclub.com/wbobafett/coo-guide-3-0/esb/yoda/#a

Family I = Kader
Family II = Unitoy
Family III = Smile

Family I moulds were passed to Lili Ledy in Mexico to make the Regresso Yoda. Family II moulds were used to make the Euro no coo, POTF and Meccanno figures.

Hi thanks so much for your help, sorry to be a pain but just found this one in a box didn't even know I had. Guessing a Kenner

 

[TheJabbaWookie]

I would say Kenner... the paint on the limbs is too dark to be Poch paint. It is a Kader family I figure though. This one should be paired with the belt you have with circular epm on the lightsaber

 

[StarWarsFan]

I would say Kenner... the paint on the limbs is too dark to be Poch paint. It is a Kader family I figure though. This one should be paired with the belt you have with circular epm on the lightsaber

Hi thanks so much for your help. Ace have put the two together.

 

[TheJabbaWookie]

I would say Kenner... the paint on the limbs is too dark to be Poch paint. It is a Kader family I figure though. This one should be paired with the belt you have with circular epm on the lightsaber

Hi thanks so much for your help. Ace have put the two together.

No probs, you’re welcome